These are movement trays with lips on three sides. They’re 2mm larger on each axis than the typical base sizes to allow for easy addition/removal etc – so 152mm wide rather than 150, for example.

3D printed in black in Newcastle, Australia.

Width x depth:

42×102 (e.g. 5 ranks of 2 20mm bases)

77×102 (e.g. two ranks of 3 25x50mm cavalry bases)

77×152 (e.g. 3 ranks of 3 25x50mm cavalry bases)

102×22 (e.g. single rank of 5 20mm bases)

102×42 (e.g. two ranks of 5 20mm bases)

102×52 (e.g. two ranks of 5 25mm bases or one rank of four 25x50mm cavalry bases)

102×62

102×82 (e.g. four ranks of five 20mm bases)

102×102 (e.g. 5 ranks of 5 20mm bases)

102×122 (e.g. 6 ranks of 5 20mm bases)

102×127 (e.g. four ranks of 5 25mm bases)

122×82

122×102 (e.g. 5 ranks of 6 20mm bases)

122×122 (e.g. 6 ranks of 6 20mm bases)

127×52 (e.g. one rank of five. 25x50mm cavalry bases)

127×127 (e.g. 5 ranks of 5x 25mm square bases)

142×102 (e.g. 5 ranks of 7 20mm bases)

152×102 (e.g. 2 ranks of 6 25x50mm cavalry bases)

152×152 (e.g. 2 ranks of 3 50x75mm monster bases)

202×22 (e.g. single rank of 10 20mm bases)

202×52

202×102

252×102 (e.g. four ranks of 10 25mm bases)

Note: Movement trays ordered prior to the end of 2022 were measured the other way around. Not relevant unless you’re re-ordering and wanted the same sizes.

5out of 5Paul S.(verified owner)–Great prints, quick delivery time.

100% recommend