Round Slotted Slotta Wargaming Bases 25mm, 32mm, 40mm – 3D Printed

Round wargaming slotted bases! The slot in the centre of the base as shown.

The slot is nominally 20×1.85mm – this is wide enough for many slotta miniatures but some (particularly late-noughties and some 80s Citadel) may be too fat for that – if you need something that has >1.8mm clearance let me know and I’ll make an alternative.

FDM printed at 200 micron layer height, in black. Magnet holes for a 4×1 or 5x1mm magnet in the bottom for any sizes which allow for it comfortably, the base underside is solid otherwise.